Alkaline Degreasing Process (CLN-108):
- Process Steps:
1. Preparation: The metal parts or components to be cleaned are first inspected and prepared for the cleaning process. This may involve removal of heavy soils or pre-cleaning steps.
2. Degreasing Bath: The metal parts are immersed in a tank containing the alkaline degreasing solution (CLN-108). Alternatively, the solution can be applied through spray systems depending on the application and scale of operation.
3. Chemical Action: The alkaline cleaning agents react with the oil and grease on the metal surface, breaking them down into smaller particles and lifting them away from the substrate.
4. Rinsing: After the degreasing process, the metal parts are thoroughly rinsed with water to remove the dissolved contaminants and residual cleaning solution.
5. Drying: Once rinsed, the metal parts are dried using methods such as air drying or using heated air to prevent water spots or rust formation.
Keywords
1.
CLN
tank
scale
grease
methods
removal
Rinsing
operation
substrate
components
heated air
air drying
metal parts
heavy soils
application
water spots
Preparation
contaminants
metal surface
Process Steps
spray systems
rust formation
Chemical Action
cleaning process
smaller particles
pre-cleaning steps
2. Degreasing Bath
alkaline cleaning agents
residual cleaning solution
Alkaline Degreasing Process
alkaline degreasing solution
