VC- RUSTOMIT Rust Converter Application - Rust converters are used to treat rusted metal surfaces and prevent further corrosion by chemically converting iron oxide (rust) into a stable, protective layer. Here’s how to apply a rust converter properly: * Application Process 1. Surface Preparation - Remove loose rust: Use a wire brush, sandpaper, or a grinder to remove flaky rust, dirt, grease, and debris. - Clean the surface: Wipe the area with a damp cloth or degreaser to remove contaminants. - Dry the surface: Ensure the surface is completely dry before application. 2. Applying the Rust Converter - Shake or stir the converter: Mix well before use. - Use a brush, roller, or spray: Apply an even coat over the rusted area. - Wait for reaction: The rust converter will turn black as it reacts (typically takes 15-30 minutes). - Apply a second coat (if needed): For heavy rust, apply a second layer after the first one dries. # VC- RUSTOMIT Rust Converter Manufacturer.