Vitarag Chemicals Paint stripper is formulated to remove old paint film from Steel , Aluminium,Wood etc. Recimmended use: Excellent paint stripper for striping old paint from various objects without damaging the original object. This saves a lot of time and labor as this projuct gives instant results. Method of Application : 1 Sprinkle water on the surface from which the old paint film is removed. 2 Give light zig-zag scratches on the paint surface so that the paint remove properly penetrates the paint up to the base . 3 Apply paint stripper by brush on the scratched surface . 4 For better results specially in summer again sprinkle water on the surface where paint remove is applied. 5 Paint film will immediately start pilling of from the surface. After total pilling of paint fill scrap it and wash it with the water properly 6 If paint layers are more on the surface repeat the method 1 to 5 again

INTRODUCTION: Degreasing Chemical used whenever parts contains heavy grease, oil & light rust. This chemical also removes certain part of carbon. Base : Alkaline Base Chemical. Solubility : Thoroughly soluble in water. Color : white Concentration : 5% (w/v) is suitable for Hot process & in case of cold 8% required. Point : Concentrated of 8% bath Solution gives 6 to 8 ml. Point. Bath Design : Tank is made up of 10mm thick. M.S. tank with F.R.P. Vinyl coat of F.R.P. Lining works will be the most suitable or sustainable design

COROSEAL-108 is a neutral liquid chemical consisting of surfactants, dispersants and corrosion Inhibitors. It is a multipurpose cleaning agent, widely used for removal of soils, oils, cutting fluids, Stamping, buffing and drawing compounds from ferrous as well as non-ferrous metal surfaces. COROSEAL-108 is easily soluble in water at all proportions and is very safe to use as it does not contain any chlorinated solvents, phenols, chromates, nitrites or cresols. It is non-toxic and biodegradable.

Vitarag Chemicals welcomes you. We are proud to introduce ourselves as the leading manufacturer, suppliers of metal pretreatment chemicals in India. Professional Paint Strippingis heavy duty industrial Powder coating remover used for removal of paint & powder coating from the metal surface. The chemical penetrates through the film and the film bubbles out. It is used to remove all types of liquid as well as powder paints, lacquers, enamels & polyurethanes from a metal surface. Professional Paint Stripping is used by immersion application at room temperature. The dipping time may range from 1 to 5 min depending on the surrounding temperature, nature, and thickness of the paint. It may also be applied by brush on the surface of the coating to be removed. Allow standing for 1 to 5 min, depending on the nature and thickness of the coating to be removed. Two or more brush may have to be applied for complete removal of stubborn paint. Remove by scraping, brushing or water jet application. While there are several reasons why you should go for our company: We formulate products based on the end users specific requirements through extensive R& D and validation procedures. We provide reliable and quality products timely as we maintain strict quality control procedures for our raw materials and finished goods. We offer comprehensive customer support post supply We supply products at most competitive prices. In line with clients diverse requirements, we are involved in providing an optimum quality range of Powder Coating /Paint Remover Chemical.

VC-CORO 81-RUST RUST REMOVER: VC-CORO 81-Rust effortlessly removes rust from automotive parts, hardware, tools, cookware, and antiques without any scrubbing or sanding. SAFE TO USE: This metal rust remover is made of a non-toxic and water-based solution that is easy-to-use on automotive, household and industrial-grade metal parts. It contains no harmful acids, solvents, bases, odors or fumes. VERSATILE: The non-corrosive rust remover can be used to remove rust from all metals including auto parts, tools, cast iron cookware, clocks, grills, and more. EASY TO USE: To remove rust from your metal parts submerge completely in the water-based rust remover, once rust is removed, rinse with water and protect with corrosion inhibitor.

GENERAL DESCRIPTION. VCBLK HB-18 is a new revolutionary development in cold black finishing. It will impart jet black conversion coating to steels, cast iron and other ferrous metals at room-temperature.VCBLK HB-18 process is easy to do in-house. It is non-caustic, non-splattering, safe, energysaving, fast, dependable and convenient. It increases productivity and lowers labour costs.Finishing can be done anywhere without special equipment, ventilation, heating systems or anycomplicated control procedures.EQUIPMENT REQUIREDAcid Resistant tanks, containers, tumbling barrels, baskets, hooks and racks must be used withVCBLK HB-18 and derusting tank. Plastic or Rubber lined tanks and plastic-coated hooks andracks are suitable for both VCBLK HB-18 and derusting tanks. Mild steel may be used fordegreasing, rinsing & sealant tanks.DIRECTIONS FOR USE1. Thoroughly clean and degrease the pieces to be blackened in KLN 18. The type and degree ofsurface soil will determine the length of time and the number of cleaning steps and cleaningtemperature (M.S. Tank).2. Rinse thoroughly in overflowing cold water (M.S. Tank).3. Surface rust, if present, should be removed following cleaning cycle using RLN 27 at aconcentration of 1:1 at room temperature (FRP Tank).4. Rinse thoroughly in overflowing cold water (M.S. Tank).5. Immerse the pieces in VCBLK HB-18 solution. VCBLK HB-18 solution is to be diluted with 6to 12 parts of water depending on alloy and surface, hardness. The immersion time necessary toproduce the desired depth of black, is usually one to three minutes. For most parts a dilution ofone part VCBLK HB-18 with 9 parts of water would give good results (FRP Tank).6. Rinse the pieces in overflowing cold water for 30 seconds (M.S. Tank). 7. Immerse the pieces in oil, a dewatering type rust preventive at room temperature for 3 minutesto seal the finish and impart corrosion resistance (M.S. Tank).The above parts can be sealed while wet or dry. If parts have to be dried prior to sealing, step 6should be followed with a hot water rinse and the parts to be sealed as soon as they are dry.A wide range of rust preventives are available with us. Consult us on what type of finish andprotection you require for your parts or components and we can suggest a suitable oil.

Description: Vitarag Chemicals Paint stripper is formulated to remove old paint film from Steel , Aluminium,Wood etc. Recimmended use: Excellent paint stripper for striping old paint from various objects without damaging the original object. This saves a lot of time and labor as this projuct gives instant results. Method of Application : 1 Sprinkle water on the surface from which the old paint film is removed. 2 Give light zig-zag scratches on the paint surface so that the paint remove properly penetrates the paint up to the base . 3 Apply paint stripper by brush on the scratched surface . 4 For better results specially in summer again sprinkle water on the surface where paint remove is applied. 5 Paint film will immediately start pilling of from the surface. After total pilling of paint fill scrap it and wash it with the water properly. 6 If paint layers are more on the surface repeat the method 1 to 5 again

Description: Vitarag Chemicals Paint stripper is formulated to remove old paint film from Steel , Aluminium,Wood etc. Recimmended use: Excellent paint stripper for striping old paint from various objects without damaging the original object. This saves a lot of time and labor as this projuct gives instant results. Method of Application : 1 Sprinkle water on the surface from which the old paint film is removed. 2 Give light zig-zag scratches on the paint surface so that the paint remove properly penetrates the paint up to the base . 3 Apply paint stripper by brush on the scratched surface . 4 For better results specially in summer again sprinkle water on the surface where paint remove is applied. 5 Paint film will immediately start pilling of from the surface. After total pilling of paint fill scrap it and wash it with the water properly. 6 If paint layers are more on the surface repeat the method 1 to 5 again

VITARAG CHEMICALS IS LEADING MANUFACTURER OF STRIPPI POWERFULL PAINT REMOVER. Vitarag Chemicals Paint stripper is formulated to remove old paint film from Steel , Aluminium,Wood etc. Recommended use: Excellent paint stripper for striping old paint from various objects without damaging the original object. This saves a lot of time and labor as this projuct gives instant results. Method of Application : 1 Sprinkle water on the surface from which the old paint film is removed. 2 Give light zig-zag scratches on the paint surface so that the paint remove properly penetrates the paint up to the base . 3 Apply paint stripper by brush on the scratched surface . 4 For better results specially in summer again sprinkle water on the surface where paint remove is applied. 5 Paint film will immediately start pilling of from the surface. After total pilling of paint fill scrap it and wash it with the water properly. 6 If paint layers are more on the surface repeat the method 1 to 5 again