Blackening Products For Metal Surfaces is a new revolutionary development in cold black finishing. It will impart jet black conversion coating to steels, cast iron and other ferrous metals at room-temperature. VCBLK HB-18 process is easy to do in-house. It is non-caustic, non-splattering, safe, energy saving, fast, dependable and convenient. It increases productivity and lowers labour costs. Finishing can be done anywhere without special equipment, ventilation, heating systems or any complicated control procedures. EQUIPMENT REQUIRED Acid Resistant tanks, containers, tumbling barrels, baskets, hooks and racks must be used with VCBLK HB-18 and derusting tank. Plastic or Rubber lined tanks and plastic-coated hooks and racks are suitable for both VCBLK HB-18 and derusting tanks. Mild steel may be used for degreasing, rinsing & sealant tanks. DIRECTIONS FOR USE 1. Thoroughly clean and degrease the pieces to be blackened in KLN 18. The type and degree of surface soil will determine the length of time and the number of cleaning steps and cleaning temperature (M.S. Tank). 2. Rinse thoroughly in overflowing cold water (M.S. Tank). 3. Surface rust, if present, should be removed following cleaning cycle using RLN 27 at a concentration of 1:1 at room temperature (FRP Tank). 4. Rinse thoroughly in overflowing cold water (M.S. Tank). 5. Immerse the pieces in VCBLK HB-18 solution. VCBLK HB-18 solution is to be diluted with 6 to 12 parts of water depending on alloy and surface, hardness. The immersion time necessary to produce the desired depth of black, is usually one to three minutes. For most parts a dilution of one part VCBLK HB-18 with 9 parts of water would give good results (FRP Tank). 6. Rinse the pieces in overflowing cold water for 30 seconds (M.S. Tank).

Industrial Degreaser INTRODUCTION: Industrial Degreaser Chemical used whenever parts contains heavy grease, oil & light rust.This chemical also removes certain part of carbon. Contaminated component surfaces, such as those caused by residues of forming oils, impair the quality during production. Degreasing as a cleaning process therefore makes a significant contribution to the economic efficiency of the production process. When processing sheet metal parts and metal, the use of lubricants and oils is sometimes necessary. For example, cooling lubricants are used before turning and milling or forming oils. Since the residues of grease and oils can have a disturbing effect in further processing steps, degreasing is part of the preparatory surface treatment. Special solvents, so-called degreasing agents, are used to this end. The dissolve greases and oils from the surface of the workpiece, thus degreasing and de-oiling them. Degreasing can be carried out with liquid solutions or in the form of dry degreasing.

Aluminium Cleaner for Kitchen cleans soft metals/non-ferrous metals very effectively with no discoloration or stain mark or white rust. It was formulated as a neutral cleaner specifically to clean soft metals. However, it is also suitable for cleaning all other ferrous and non-ferrous metals. Eco-friendly aluminium cleaner neutral cleaner is safe for use on all metals and requires no extra steps for most applications. Hence, you may safely and effectively use it as an aluminum cleaner, brass cleaner and copper cleaner as well. This neutral degreaser is best used in a cleaning application where the most powerful cleaning action is desired and different types of metals will be cleaned in the same parts washer. It makes cleaning Aluminium/Aluminum and other soft metal surfaces fast and easy, saving time and money in the process. This brass cleaner is low foaming and a neutral pH biodegradable degreaser/cleaner for use in manual, ultrasonic, spray wash, immersion and many other machine cleaning applications. It is a safe-handling detergent that can be used for non-corrosive cleaning. Despite its several capabilities, Eco-friendly aluminium cleaner degreaser has been one of our most popular industrial cleaning products to clean/degrease Aluminium effectively.

VCCLEAN-HD18 is an universal cleaning composition which could be used be very safely on any metal or assemblies. It can be used for general cleaning for removal of oils, soils, fabricating fluids, burrs, buffing and drawing compounds etc. It is extremely safe to handle and contains no toxic or hazardous constituents and is neither inflammable nor poisonous. It is a solvent based neutral cleaner which can be readily mixed with water in all proportions. VCCLEAN-HD18 can be used by wipe, or immersion in various types of equipments such as ultrasonics, tumblers, agitated tanks. No rinse is mandatory after cleaning with VCCLEAN-HD18 and hence it cleans and protects simultaneously. It can be used as a spray cleaner in service stations and maintenance depots at very low concentrations very effectively, but should not be used in spray washing machines. This composition is bio-degradable and environment friendly.

Aluminium Polishing Cleaner cleans soft metals/non-ferrous metals very effectively with no discoloration or stain mark or white rust. It was formulated as a neutral cleaner specifically to clean soft metals. However, it is also suitable for cleaning all other ferrous and non-ferrous metals. Eco-friendly aluminium cleaner neutral cleaner is safe for use on all metals and requires no extra steps for most applications. Hence, you may safely and effectively use it as an aluminum cleaner, brass cleaner and copper cleaner as well. This neutral degreaser is best used in a cleaning application where the most powerful cleaning action is desired and different types of metals will be cleaned in the same parts washer. It makes cleaning Aluminium/Aluminum and other soft metal surfaces fast and easy, saving time and money in the process. This brass cleaner is low foaming and a neutral pH biodegradable degreaser/cleaner for use in manual, ultrasonic, spray wash, immersion and many other machine cleaning applications. It is a safe-handling detergent that can be used for non-corrosive cleaning. Despite its several capabilities, Aluminium Polishing Cleaner degreaser has been one of our most popular industrial cleaning products to clean/degrease Aluminium effectively.

. ALM 81 ALUMINIUM CLEANER . ·Vitarag Chemicals welcomes you. We are proud to introduce ourselves as the leading manufacturer & suppliers of metal pretreatment chemicals. ·We offer different Degreasing chemicals for a different metal surface. . ·CLN 108 series of alkaline degreasers in powder form which can be used in cold or hot, spray or dip application. ·ALM 81 is an emulsified acidic degreaser which is in liquid form. It can be used for all the metal surfaces at room temperature by dipping application. ·We also provide 2 in 1 chemicals that remove oil as well as rust from the mild steel surface. ·We provide ALM 81 especially for aluminum degreasing For your particular requirement, may contact us to suggest you the right degreasing product that suits your requirement While there are several reasons why you should go for our company: ·We formulate products based on the end user’s specific requirements through extensive R&D and validation procedures. ·We provide reliable and quality products timely as we maintain strict quality control procedures for our raw materials and finished goods. ·We offer comprehensive customer support post supply ·We supply products at most competitive prices. ·We are supplying to hundreds of esteemed customers since years with best of their satisfaction. Additional Information: ·Port of Dispatch: As per National and International Norms. We are involving in providing an excellent quality array of ALM81 Aluminium Cleaner Chemical for catering the various needs of our buyers. This chemical is used whenever parts contain grease, oil and Anodized This can be by brush application of immersion

RUST REMOVER CHEMICAL . Vitarag Chemicals supply and manufacture all kinds of Rust Treatment Chemicals & Rust Remover Chemicals for industrial use based at Vadodara Gujarat. . Rust Remover is a powerful rust dis-integrating solution. It is a quality product that has been a trusted for Rust removing for years. This is a multipurpose maintenance aid and significantly reduces the maintenance cost. It is specially formulated to fight rust, which makes it indispensable to industrial plant, factories and garages. . Overall MS108 Rust Remover acts as a dis-integrator, dismantler, Lubricator, decarboniser & cleaner The active ingredients in MS108 Rust Remover attack the point where rust and metal parts are bound together and consequently eliminate rust from the surface. It also penetrates the tightest of joints reaches between the finest of threads and enters the innermost points of inaccessible mechanisms . Non Messy . Non Injurious . Saves Time & Labour . Excellent film spreading properly Excellent penetrating properties Non Corrosives

. We offer LIQUID FORM HDAL CLEANER to our clients. Details · Vitarag Chemicals welcomes you. We are proud to introduce ourselves as the leading manufacturer & suppliers of metal pretreatment chemicals. · We offer different Degreasing chemicals for a different metal surface. · LIQUID FORM HDAL CLEANER in powder form which can be used in cold or hot, spray or dip application. · ALM 81 is an emulsified acidic degreaser which is in liquid form. It can be used for all the metal surfaces at room temperature by dipping application. · We also provide 2 in 1 chemicals that remove oil as well as rust from the mild steel surface. · We provide ALM 81 especially for aluminum degreasing For your particular requirement, may contact us to suggest you the right degreasing product that suits your requirement While there are several reasons why you should go for our company: · We formulate products based on the end user’s specific requirements through extensive R&D and validation procedures. · We provide reliable and quality products timely as we maintain strict quality control procedures for our raw materials and finished goods. · We offer comprehensive customer support post supply · We supply products at most competitive prices. · We are supplying to hundreds of esteemed customers since years with best of their satisfaction.

Biodegradable Degreaser Cleaner used whenever parts contains heavy grease, oil & light rust.This chemical also removes certain part of carbon. Contaminated component surfaces, such as those caused by residues of forming oils, impair the quality during production. Degreasing as a cleaning process therefore makes a significant contribution to the economic efficiency of the production process. When processing sheet metal parts and metal, the use of lubricants and oils is sometimes necessary. For example, cooling lubricants are used before turning and milling or forming oils. Since the residues of grease and oils can have a disturbing effect in further processing steps, degreasing is part of the preparatory surface treatment. Special solvents, so-called degreasing agents, are used to this end. The dissolve greases and oils from the surface of the workpiece, thus degreasing and de-oiling them. Degreasing can be carried out with liquid solutions or in the form of dry degreasing.