1. ZNP-54 ZINC PHOSPHATING CHEMICAL 2. Generally zinc phosphate conversion coating is used to provide long lasting corrosion protection. Almost all automotive industries use this type of conversion coating. It is suitable for the products come against hard weather conditions. Coating quality is better than iron phosphate coating. It forms 2 - 5 gr/m² coating on the metal surface when used as under paint. Application, set up and control of this process are more difficult than other methods and can be applied by immersion or spray. 3. Organic compounds like nickel and manganese are added to the bath to increase the coating performance. Also activation can be used to form small phosphate crystals on the metal surface before zinc phosphating. 4. Zinc phosphate reaction happens in amorphous shape with gray - black color. 5. pH optimizers are added to accelerate the reaction. Temperature, application time, concentration, pH, total acid and free acid values are the parameters which must be under control. 6. Zinc phosphates, coating range between 7 - 15 gr/m², are used in wire drawing, tube drawing and cold forming industries. Phosphated metal workpieces are prepared to the next stage by application of protective lubricans and soap

CHROMATIZING Aluminium chromate and its applications What we call as phosphating to steel an iron is called chromating for aluminium surfaces. Also it is knows as alodine coating. There are yellow, green and transparent chromating types. Yellow chromate coats Cr+6, green chromate coats Cr+3. Coating weight can vary according to application time and coating type. Drying temperature must not pass over 65 º C for yellow chromate and 85 º C for green and transparent chromate coatings. It is importat to provide clean, grease free surface before chromate application. If hot degreasing bath is prepared, caustic bath and following nitric acid bath can be used for pickling. On the other hand, acidic degreasing baths have pickling ability with itselves. Chromating and paint adhesion will be much better on pickled and degreased aluminium surface.

COROSEAL-108 is a neutral liquid chemical consisting of surfactants, dispersants and corrosion Inhibitors. It is a multipurpose cleaning agent, widely used for removal of soils, oils, cutting fluids, Stamping, buffing and drawing compounds from ferrous as well as non-ferrous metal surfaces. COROSEAL-108 is easily soluble in water at all proportions and is very safe to use as it does not contain any chlorinated solvents, phenols, chromates, nitrites or cresols. It is non-toxic and biodegradable.

We offer Aluminium Degreaser to our clients. Details · Vitarag Chemicals welcomes you. We are proud to introduce ourselves as the leading manufacturer & suppliers of metal pretreatment chemicals. · We offer different Degreasing chemicals for a different metal surface. · CLN 108 series of alkaline degreasers in powder form which can be used in cold or hot, spray or dip application. · ALM 81 is an emulsified acidic degreaser which is in liquid form. It can be used for all the metal surfaces at room temperature by dipping application. · We also provide 2 in 1 chemicals that remove oil as well as rust from the mild steel surface. · We provide ALM 81 especially for aluminum degreasing For your particular requirement, may contact us to suggest you the right degreasing product that suits your requirement While there are several reasons why you should go for our company: · We formulate products based on the end user’s specific requirements through extensive R&D and validation procedures. · We provide reliable and quality products timely as we maintain strict quality control procedures for our raw materials and finished goods. · We offer comprehensive customer support post supply · We supply products at most competitive prices. · We are supplying to hundreds of esteemed customers since years with best of their satisfaction.

Bio Degradable Degreasing is an alkaline liquid chemical consisting of surfactants, dispersants and corrosion inhibitors. Bio Degradable Degreasing is a multipurpose cleaning agent, Bio Degradable Degreasing widely used for removal of soils, oils, cutting fluids, stamping, buffing and drawing compounds from ferrous as well as non-ferrous metal surfaces. Bio Degradable Degreasing is easily soluble in water at all proportions and is very safe to use as Bio Degradable Degreasing does not contain any chlorinated solvents, phenols, chromates, nitrites or cresols. Bio Degradable Degreasing is non-toxic. Bio Degradable Degreasing can be used by wipe, immersion or spray in various types of cleaning equipments such as tumblers, vibrators, agitators, power washers, steam cleaners, immersion or agitated tanks, ultrasonic or vapour cleaners etc. Since Bio Degradable Degreasing contains corrosion inhibitors, no rinse is required after cleaning hence Bio Degradable Degreasing cleans and protects simultaneously. Bio Degradable Degreasing Protection period may depend on operating parameters and indoor conditions.

ALKALINE STRIPPER 108 is a specially formulated alkaline composition containing sequestrants andsurface active agents. It is recommended for use on ferrous components for removal of various soils,greases oils, lubricants, drawing & stamping compounds, paints, varnishes and carbon deposits. It alsoremoves light to medium rust from ferrous metal surfaces very effectively. Due to its versatile cleaningproperties, it is widely used for a variety of cleaning applications. ALKALINE STRIPPER 108 shouldnot be used on non-ferrous components. It is non-toxic but corrosive to skin.

VCCLEAN-HD18 is an universal cleaning composition which could be used be very safely on any metal or assemblies. It can be used for general cleaning for removal of oils, soils, fabricating fluids, burrs, buffing and drawing compounds etc. It is extremely safe to handle and contains no toxic or hazardous constituents and is neither inflammable nor poisonous. It is a solvent based neutral cleaner which can be readily mixed with water in all proportions. VCCLEAN-HD18 can be used by wipe, or immersion in various types of equipments such as ultrasonics, tumblers, agitated tanks. No rinse is mandatory after cleaning with VCCLEAN-HD18 and hence it cleans and protects simultaneously. It can be used as a spray cleaner in service stations and maintenance depots at very low concentrations very effectively, but should not be used in spray washing machines. This composition is bio-degradable and environment friendly.

ZNP-54 ZINC PHOSPHATING CHEMICAL Generally zinc phosphate conversion coating is used to provide long lasting corrosion protection. Almost all automotive industries use this type of conversion coating. It is suitable for the products come against hard weather conditions. Coating quality is better than iron phosphate coating. It forms 2 - 5 gr/m coating on the metal surface when used as under paint. Application, set up and control of this process are more difficult than other methods and can be applied by immersion or spray. Organic compounds like nickel and manganese are added to the bath to increase the coating performance. Also activation can be used to form small phosphate crystals on the metal surface before zinc phosphating. Zinc phosphate reaction happens in amorphous shape with gray - black color. pH optimizers are added to accelerate the reaction. Temperature, application time, concentration, pH, total acid and free acid values are the parameters which must be under control. Zinc phosphates, coating range between 7 - 15 gr/m, are used in wire drawing, tube drawing and cold forming industries. Phosphated metal workpieces are prepared to the next stage by application of protective lubricans and soap

. ALM 81 ALUMINIUM CLEANER . ·Vitarag Chemicals welcomes you. We are proud to introduce ourselves as the leading manufacturer & suppliers of metal pretreatment chemicals. ·We offer different Degreasing chemicals for a different metal surface. . ·CLN 108 series of alkaline degreasers in powder form which can be used in cold or hot, spray or dip application. ·ALM 81 is an emulsified acidic degreaser which is in liquid form. It can be used for all the metal surfaces at room temperature by dipping application. ·We also provide 2 in 1 chemicals that remove oil as well as rust from the mild steel surface. ·We provide ALM 81 especially for aluminum degreasing For your particular requirement, may contact us to suggest you the right degreasing product that suits your requirement While there are several reasons why you should go for our company: ·We formulate products based on the end user’s specific requirements through extensive R&D and validation procedures. ·We provide reliable and quality products timely as we maintain strict quality control procedures for our raw materials and finished goods. ·We offer comprehensive customer support post supply ·We supply products at most competitive prices. ·We are supplying to hundreds of esteemed customers since years with best of their satisfaction. Additional Information: ·Port of Dispatch: As per National and International Norms. We are involving in providing an excellent quality array of ALM81 Aluminium Cleaner Chemical for catering the various needs of our buyers. This chemical is used whenever parts contain grease, oil and Anodized This can be by brush application of immersion