Blackening Chemicals For Manufacturing Industry is a new revolutionary development in cold black finishing. It will impart jet black conversion coating to steels, cast iron and other ferrous metals at room-temperature. VCBLK HB-18 process is easy to do in-house. It is non-caustic, non-splattering, safe, energy saving, fast, dependable and convenient. It increases productivity and lowers labour costs. Finishing can be done anywhere without special equipment, ventilation, heating systems or any complicated control procedures. EQUIPMENT REQUIRED Acid Resistant tanks, containers, tumbling barrels, baskets, hooks and racks must be used with VCBLK HB-18 and derusting tank. Plastic or Rubber lined tanks and plastic-coated hooks and racks are suitable for both VCBLK HB-18 and derusting tanks. Mild steel may be used for degreasing, rinsing & sealant tanks. DIRECTIONS FOR USE 1. Thoroughly clean and degrease the pieces to be blackened in KLN 18. The type and degree of surface soil will determine the length of time and the number of cleaning steps and cleaning temperature (M.S. Tank). 2. Rinse thoroughly in overflowing cold water (M.S. Tank). 3. Surface rust, if present, should be removed following cleaning cycle using RLN 27 at a concentration of 1:1 at room temperature (FRP Tank). 4. Rinse thoroughly in overflowing cold water (M.S. Tank). 5. Immerse the pieces in VCBLK HB-18 solution. VCBLK HB-18 solution is to be diluted with 6 to 12 parts of water depending on alloy and surface, hardness. The immersion time necessary to produce the desired depth of black, is usually one to three minutes. For most parts a dilution of one part VCBLK HB-18 with 9 parts of water would give good results (FRP Tank). 6. Rinse the pieces in overflowing cold water for 30 seconds (M.S. Tank).

RUST CONVERTER CHEMICAL Paints applied over VITARAG CHEMICALS coating are 2 to 3 times more durable when applied on rusty surface. It has very easy application with little labour. No special equipments are needed. Rust removing operations are eliminated & metallic surface is converted into more useful and hard blue black protective coating. VITARAG CHEMICALS is a guarantee of long lasting protection. VITARAG CHEMICALS is such an active chemical that it reacts in depth with all the rusty layers & forms a protective film which prevents further rust formation. VITARAG CHEMICALS has a triple action on rust. 1) Penetrates through all the rust layers. 2) Reacts with all the rust deposits & converts them to a metal organic compound of a hard blue black colour. 3) Stabilizes and binds the rust layers into a 100% protective neutral coat.

We are dedicatedly involved in manufacturing an excellent quality array of Aluminium Cleaner, for catering the various needs of our clients. Aimed at the prosperous growth in this domain, we are instrumental in offering a premium quality and wide range of Chromatizing Chemical. Specification/Additional Details BRAND : ALM 81 PRODUCT NAME : ALUMINIUM CLEANER PACKING TYPE : CAN/CARBOYS PACKING SIZE : 40 KG USAGE APPLICATION : INDUSTRIAL FORM OF CHEMICAL : LIQUID USAGE RATIO : 10% (V/V)

Base : Phosphoric Acid Base Chemical. Solubility : Thoroughly soluble in water. Color : Water White. Concentration : One part of chemical is diluted with two to four parts of water. Dilution Is depended by the amount of oil present. The chemical is used cold. Point : Concentrated of 25 % bath solution gives 8 to 10 ml. Application : This chemical is used whenever parts contain light grease and OIL. Bath Design : Tank make up5mm thick. M.S. tank with rubber or F.R.P. lining. For Small components PVC tank can be used as free grease floats on the surface. Generally tank design is made with large surface areas consideration. Lifting tackles are preferably used for handling material. A bottom outlet with get valve is provided 6’’ above the bottom outlet so that impurities do not disperse in the total solution. A water inlet is provided at the top.

VCHEMKLIN is designed to simplify pre-paint treatment of metal aircraft surfaces like wing sections, fuselages as well as automobiles and tractor assemblies. Complete assembled planes can be cleaned and conditioned right on the field without the use of special equipment. Easy hand application of VCHEMKLIN by brushing, swabbing or spraying provides thoroughly clean passivated surface ready for touch-up or complete refinishing. FAST, LOW COST METHOD :- Passivating with VCHEMKLIN is not intended to replace anodizing and chromatising in aircraft and automobile manufacturing. However it produces similar results faster and at much lower cost where those processes are impractical or unavailable. REMOVES, PREVENTS CORROSION :- Light oxides and surface corrosive residues are quickly and easily removed by merely applying VCHEMKLIN by wipe method and rinsing with water. Surfaces is made chemically inert oxide and soil free to prevent corrosion from spreading under paint coatings.

RLN 27 Derusting Rust Remover Chemical RLN 27 Derusting Rust Remover Chemical dissolves rust quickly without harming surrounding parts, trim, gaskets or paint. Our rust remover restores surfaces to bare metal without scraping, chipping or scrubbing. To remove light rust, leave the parts in remove heavy rust, leave parts in the rust removal solution 30 min This non-toxic and biodegradable rust remover formula is effective on small or large items that can be RLN 27 Derusting rln-27 rust remover dissolves rust quickly without harming surrounding parts, trim, gaskets or paint. our rust remover restores surfaces to bare metal without scraping, chipping or scrubbing. to remove light rust, leave the parts in 10-20 min and to remove heavy rust, leave parts in the rust removal solution 30 min.this non-toxic and biodegradable rust remover formula is effective on small or large items that can be soaked. with our expertise and trustworthiness, we are engaged in offering an optimum quality range of RLN 27 Derusting chemical. RLN 27 Derusting chemical is used for removing rust, scales, welding scales, thin film of oil and grease. this chemical has replaced the use of hydrochloric acid for rust removal. we make sure that this chemical is formulated using environmentally safe acids.

Paints applied over VITARAG CHEMICALS coating are 2 to 3 times more durable when applied on rusty surface. It has very easy application with little labour. No special equipments are needed. Rust removing operations are eliminated & metallic surface is converted into more useful and hard blue black protective coating. VITARAG CHEMICALS is a guarantee of long lasting protection. VITARAG CHEMICALS is such an active chemical that it reacts in depth with all the rusty layers & forms a protective film which prevents further rust formation. VITARAG CHEMICALS has a triple action on rust. 1)Penetrates through all the rust layers. 2)Reacts with all the rust deposits & converts them to a metal organic compound of a hard blue black colour. 3)Stabilizes and binds the rust layers into a 100% protective neutral coat.

Vitarag Chemicals is a leading manufacturer of metal Pre Treatment Chemicals which can also be known as powder coating chemicals manufacturer. We have been manufacturing and supplying pre treatment chemicals to Best Powder Coating Chemicals in India and out of India.

Vitarag Chemicals is a leading manufacturer of metal Pre Treatment Chemicals which can also be known as powder coating chemicals manufacturer. We have been manufacturing and supplying pre treatment chemicals to Powder Coating Chemicals Manufacturer in India and out of India.