Blackening Products For Metal Surfaces is a new revolutionary development in cold black finishing. It will impart jet black conversion coating to steels, cast iron and other ferrous metals at room-temperature. VCBLK HB-18 process is easy to do in-house. It is non-caustic, non-splattering, safe, energy saving, fast, dependable and convenient. It increases productivity and lowers labour costs. Finishing can be done anywhere without special equipment, ventilation, heating systems or any complicated control procedures. EQUIPMENT REQUIRED Acid Resistant tanks, containers, tumbling barrels, baskets, hooks and racks must be used with VCBLK HB-18 and derusting tank. Plastic or Rubber lined tanks and plastic-coated hooks and racks are suitable for both VCBLK HB-18 and derusting tanks. Mild steel may be used for degreasing, rinsing & sealant tanks. DIRECTIONS FOR USE 1. Thoroughly clean and degrease the pieces to be blackened in KLN 18. The type and degree of surface soil will determine the length of time and the number of cleaning steps and cleaning temperature (M.S. Tank). 2. Rinse thoroughly in overflowing cold water (M.S. Tank). 3. Surface rust, if present, should be removed following cleaning cycle using RLN 27 at a concentration of 1:1 at room temperature (FRP Tank). 4. Rinse thoroughly in overflowing cold water (M.S. Tank). 5. Immerse the pieces in VCBLK HB-18 solution. VCBLK HB-18 solution is to be diluted with 6 to 12 parts of water depending on alloy and surface, hardness. The immersion time necessary to produce the desired depth of black, is usually one to three minutes. For most parts a dilution of one part VCBLK HB-18 with 9 parts of water would give good results (FRP Tank). 6. Rinse the pieces in overflowing cold water for 30 seconds (M.S. Tank).

RLN 27 Derusting Rust Remover Chemical RLN 27 Derusting Rust Remover Chemical dissolves rust quickly without harming surrounding parts, trim, gaskets or paint. Our rust remover restores surfaces to bare metal without scraping, chipping or scrubbing. To remove light rust, leave the parts in remove heavy rust, leave parts in the rust removal solution 30 min This non-toxic and biodegradable rust remover formula is effective on small or large items that can be RLN 27 Derusting rln-27 rust remover dissolves rust quickly without harming surrounding parts, trim, gaskets or paint. our rust remover restores surfaces to bare metal without scraping, chipping or scrubbing. to remove light rust, leave the parts in 10-20 min and to remove heavy rust, leave parts in the rust removal solution 30 min.this non-toxic and biodegradable rust remover formula is effective on small or large items that can be soaked. with our expertise and trustworthiness, we are engaged in offering an optimum quality range of RLN 27 Derusting chemical. RLN 27 Derusting chemical is used for removing rust, scales, welding scales, thin film of oil and grease. this chemical has replaced the use of hydrochloric acid for rust removal. we make sure that this chemical is formulated using environmentally safe acids.

Vitarag Chemicals is a leading manufacturer of metal Pre Treatment Chemicals which can also be known as powder coating chemicals manufacturer. We have been manufacturing and supplying pre treatment chemicals to Powder Coating Chemicals For Metal Surfaces in India and out of India.

VC 108 RUST REMOVER VC 108 Rust Remover is a powerful rust dis-integrating solution. It is a quality product that has been a trusted for Rust removing for years. This is a multipurpose maintenance aid and significantly reduces the maintenance cost. It is specially formulated to fight rust, which makes it indispensable to industrial plant, factories and garages. Overall VC108 Rust Remover acts as a dis-integrator, dismantler, Lubricator, decarboniser & cleaner The active ingredients in VC108 Rust Remover attack the point where rust and metal parts are bound together and consequently eliminate rust from the surface. It also penetrates the tightest of joints reaches between the finest of threads and enters the innermost points of inaccessible mechanisms Non Messy Non Injurious Saves Time & Labour Excellent film spreading properly Excellent penetrating properties Non Corrosives Rust Converter Best Rust Converter Industrial Rust Converter Rust Converter for Metal Rust Converter Spray Rust Converter Paint Corrosion Converter Rust Neutralizer Metal Rust Converter Rust Treatment for Metal Rust Removal Solution Rust Prevention Coating Convert Rust to Primer Rust Converter Gel Heavy Duty Rust Converter Rust Converter for Cars Rust Converter for Trucks Rust Converter for Industrial Use Rust Converter for Marine Rust Converter for Tools Professional Rust Converter Paint Remover Manufacturers Paint Remover Wholesalers Paint Remover Distributors Paint Remover Manufacturers near me Best Paint Remover Manufacturers In India Best Paint Remover Manufacturers In Gujarat

3 IN 1 RUST REMOVER CHEMICAL Relying over our expertise in this domain, we are engaged in offering 3 In 1 Rust Remover Chemical to our respected clients. These chemicals are used in only before powder coating for rust removing, light rust removing & metal coating for foundation of powder coating. Use of It increases life of powder coated product Features:- Balanced composition Free from impurity Stable physical and chemical properties low Viscosity Hygienically packed Effectiveness Scale and rust remover concentrate. CRC Rust Remover is a phosphoric acid based concentrate used to remove rust and to clean metal surfaces. It cleans tarnish, oxidation, stains, fingerprints and scale from iron, steel, copper, brass and aluminium.

RUST REMOVER CHEMICAL - Vitarag Chemicals supply and manufacture all kinds of Rust Treatment Chemicals & Rust Remover Chemicals for industrial use based at Vadodara Gujarat. - Rust Remover is a powerful rust dis-integrating solution. It is a quality product that has been a trusted for Rust removing for years. This is a multipurpose maintenance aid and significantly reduces the maintenance cost. It is specially formulated to fight rust, which makes it indispensable to industrial plant, factories and garages. - Overall VC108 Rust Remover acts as a dis-integrator, dismantler, Lubricator, decarboniser & cleaner The active ingredients in VC108 Rust Remover attack the point where rust and metal parts are bound together and consequently eliminate rust from the surface. It also penetrates the tightest of joints reaches between the finest of threads and enters the innermost points of inaccessible mechanisms - Non Messy - Non Injurious - Saves Time & Labour - Excellent film spreading properly - Excellent penetrating properties Non Corrosive

Aluminium Cleaner for Kitchen cleans soft metals/non-ferrous metals very effectively with no discoloration or stain mark or white rust. It was formulated as a neutral cleaner specifically to clean soft metals. However, it is also suitable for cleaning all other ferrous and non-ferrous metals. Eco-friendly aluminium cleaner neutral cleaner is safe for use on all metals and requires no extra steps for most applications. Hence, you may safely and effectively use it as an aluminum cleaner, brass cleaner and copper cleaner as well. This neutral degreaser is best used in a cleaning application where the most powerful cleaning action is desired and different types of metals will be cleaned in the same parts washer. It makes cleaning Aluminium/Aluminum and other soft metal surfaces fast and easy, saving time and money in the process. This brass cleaner is low foaming and a neutral pH biodegradable degreaser/cleaner for use in manual, ultrasonic, spray wash, immersion and many other machine cleaning applications. It is a safe-handling detergent that can be used for non-corrosive cleaning. Despite its several capabilities, Eco-friendly aluminium cleaner degreaser has been one of our most popular industrial cleaning products to clean/degrease Aluminium effectively.

ALKALINE STRIPPER 108 is a specially formulated alkaline composition containing sequestrants andsurface active agents. It is recommended for use on ferrous components for removal of various soils,greases oils, lubricants, drawing & stamping compounds, paints, varnishes and carbon deposits. It alsoremoves light to medium rust from ferrous metal surfaces very effectively. Due to its versatile cleaningproperties, it is widely used for a variety of cleaning applications. ALKALINE STRIPPER 108 shouldnot be used on non-ferrous components. It is non-toxic but corrosive to skin.

corodg-27 1. Vitarag Chemicals welcomes you. We are proud to introduce ourselves as the leading manufacturer, suppliers of metal pretreatment chemicals in India. 2. 2 IN 1 is a liquid chemical product used for surface preparation of metals before painting.The objective of treating metals with 2 in 1 Chemical, before painting is to prolong the life of paints by offering it a compatible surface to which it will be locked. 2 in 1 chemicalremoves oils, rust, soils, etc And forms a phosphate coating integral with metal surface. 3. Pretreating metals with 2 in 1 chemicaloffers the following advantages:- 1. Prevents under paint corrosion 2. Prevents spreading of rust from a damaged area to sound area adjoining it 3. Increases paint adhesion with metal substrate 4. Prevents paints from peeling or flaking off 5. Enhances durability and life of paints 2 in 1 chemical can be easily applied by swab, brush or dip after dilution with water at room temperature .After 5-10 minutes, the surface is simply wiped dry with a cloth.The surface is now ready to accept any type of paints or primers. 2 in 1 chemicalcan be applied on any ferrous metals. Few applications are on steel furniture such as chairs, tables, cupboards, cabinets, safes, lighting patties, luminaries, printers, copiers, duplicators, computer systems, typewriters boilers, heat exchangers, coolers, air conditioners, slotted angles and various other equipment machineries and fabrications, that are to be painted/or powder coated. 2 IN 1is an aqueous inhibited acidic mixture, soluble in varying proportions with water. It is a very effective degreaser for iron & steel surfaces at low temperature. It has very good penetrating power to disintegrate and dissolve, machine oils, light greases, lubricants as well as light rust, either by dipping process or by swabbing.