Blackening Chemicals Safety is a new revolutionary development in cold black finishing. It will impart jet black conversion coating to steels, cast iron and other ferrous metals at room-temperature. VCBLK HB-18 process is easy to do in-house. It is non-caustic, non-splattering, safe, energy saving, fast, dependable and convenient. It increases productivity and lowers labour costs. Finishing can be done anywhere without special equipment, ventilation, heating systems or any complicated control procedures. EQUIPMENT REQUIRED Acid Resistant tanks, containers, tumbling barrels, baskets, hooks and racks must be used with VCBLK HB-18 and derusting tank. Plastic or Rubber lined tanks and plastic-coated hooks and racks are suitable for both VCBLK HB-18 and derusting tanks. Mild steel may be used for degreasing, rinsing & sealant tanks. DIRECTIONS FOR USE 1. Thoroughly clean and degrease the pieces to be blackened in KLN 18. The type and degree of surface soil will determine the length of time and the number of cleaning steps and cleaning temperature (M.S. Tank). 2. Rinse thoroughly in overflowing cold water (M.S. Tank). 3. Surface rust, if present, should be removed following cleaning cycle using RLN 27 at a concentration of 1:1 at room temperature (FRP Tank). 4. Rinse thoroughly in overflowing cold water (M.S. Tank). 5. Immerse the pieces in VCBLK HB-18 solution. VCBLK HB-18 solution is to be diluted with 6 to 12 parts of water depending on alloy and surface, hardness. The immersion time necessary to produce the desired depth of black, is usually one to three minutes. For most parts a dilution of one part VCBLK HB-18 with 9 parts of water would give good results (FRP Tank). 6. Rinse the pieces in overflowing cold water for 30 seconds (M.S. Tank).

3 IN 1 RUST REMOVER CHEMICAL Relying over our expertise in this domain, we are engaged in offering 3 In 1 Rust Remover Chemical to our respected clients. These chemicals are used in only before powder coating for rust removing, light rust removing & metal coating for foundation of powder coating. Use of It increases life of powder coated product Features:- Balanced composition Free from impurity Stable physical and chemical properties low Viscosity Hygienically packed Effectiveness Scale and rust remover concentrate. CRC Rust Remover is a phosphoric acid based concentrate used to remove rust and to clean metal surfaces. It cleans tarnish, oxidation, stains, fingerprints and scale from iron, steel, copper, brass and aluminium.

Owing to our enriched industrial experiences, we are indulged in providing a wide variety of excellent quality Activator Powder. Features: • Precisely processed • Long shelf life • Highly effective BRAND : ACTIVATOR PRODUCT NAME : ACTIVATOR POWDER PACKING TYPE : Bag PACKING SIZE : 15 KG USAGE APPLICATION : INDUSTRIAL FORM OF CHEMICAL :POWDER USAGE RATIO : 0.5% (W/V)

ALM 81 ALM 81 ALUMINIUM CLEANER Heavy Duty ALM 81 Aluminium Cleaner and Descaler ALM 81 Aluminium Cleaner is a specially formulated highly concentrated ALM 81 Aluminium Cleaner acid for the fast removal of scale and oxide build up from alloy wheels, aluminium vehicle bodies, roller shutter doors and metal casings etc. May also be used for phosphating steel parts prior to painting. A concentrated chemical blend for cleaning all types of aluminium including commercial vehicle bodywork, especially fridge and bulk trailer bodies. It is a concentrated blend of chemical. It works brilliantly at restoring tarnished aluminium that is found on many commercial vehicles such as tipper bodies, aluminium fuel tanks etc. Also helps to protect it against damage from salt and traffic film. ALM81 ALUMINIUM CLEANER we are dedicatedly involved in providing an excellent quality array of aluminium cleaner, for catering the various needs of our customers. his is a fluoride base aluminium cleaner for industrial use.this is a dip application product.this is a single tank application for pretreatment of aluminium before powder coating.we have formulated this product with surfactants, wetting agents, fluoride & solvents to remove light oil, dirt & oxide layer present on components in single dip.this chemical works efficiently at room temp.proper etching/cleaning is achieved in 2-3 minutes time.water wash components after application then air dry. Features: Precisely processed Highly effective Free from impurities

1. HIGH GREAD ALUMINIUM CLEANER . Heavy Duty ALM 81 Aluminium Cleaner and Descaler . ALM 81 Aluminium Cleaner is a specially formulated highly concentrated ALM 81 Aluminium Cleaner acid for the fast removal of scale and oxide build up from alloy wheels, aluminium vehicle bodies, roller shutter doors and metal casings etc. . May also be used for phosphating steel parts prior to painting. . A concentrated chemical blend for cleaning all types of aluminium including commercial vehicle bodywork, especially fridge and bulk trailer bodies. . It is a concentrated blend of chemical. . It works brilliantly at restoring tarnished aluminium that is found on many commercial vehicles such as tipper bodies, aluminium fuel tanks etc. . Also helps to protect it against damage from salt and traffic film. 2. ALM81 ALUMINIUM CLEANER . we are dedicatedly involved in providing an excellent quality array of aluminium cleaner, for catering the various needs of our customers. . his is a fluoride base aluminium cleaner for industrial use.this is a dip application product.this is a single tank application for pretreatment of aluminium before powder coating.we have formulated this product with surfactants, wetting agents, fluoride & solvents to remove light oil, dirt & oxide layer present on components in single dip.this chemical works efficiently at room temp.proper etching/cleaning is achieved in 2-3 minutes time.water wash components after application then air dry. 3. Features: 4. Precisely processed 5. Highly effective 6. Free from impurities

Best Aluminium Cleaner we are dedicatedly involved in providing an excellent quality array of aluminium cleaner, for catering the various needs of our customers. his is a fluoride base aluminium cleaner for industrial use.this is a dip application product.this is a single tank application for pretreatment of aluminium before powder coating.we have formulated this product with surfactants, wetting agents, fluoride & solvents to remove light oil, dirt & oxide layer present on components in single dip.this chemical works efficiently at room temp.proper etching/cleaning is achieved in 2-3 minutes time.water wash components after application then air dry. Features: Precisely processed Highly effective Free from impurities

ALM 81 ALM 81 ALUMINIUM CLEANER Heavy Duty ALM 81 Aluminium Cleaner and Descaler ALM 81 Aluminium Cleaner is a specially formulated highly concentrated ALM 81 Aluminium Cleaner acid for the fast removal of scale and oxide build up from alloy wheels, aluminium vehicle bodies, roller shutter doors and metal casings etc. May also be used for phosphating steel parts prior to painting. A concentrated chemical blend for cleaning all types of aluminium including commercial vehicle bodywork, especially fridge and bulk trailer bodies. It is a concentrated blend of chemical. It works brilliantly at restoring tarnished aluminium that is found on many commercial vehicles such as tipper bodies, aluminium fuel tanks etc. Also helps to protect it against damage from salt and traffic film. ALM81 ALUMINIUM CLEANER we are dedicatedly involved in providing an excellent quality array of aluminium cleaner, for catering the various needs of our customers. his is a fluoride base aluminium cleaner for industrial use.this is a dip application product.this is a single tank application for pretreatment of aluminium before powder coating.we have formulated this product with surfactants, wetting agents, fluoride & solvents to remove light oil, dirt & oxide layer present on components in single dip.this chemical works efficiently at room temp.proper etching/cleaning is achieved in 2-3 minutes time.water wash components after application then air dry. Features: Precisely processed Highly effective Free from impurities

ALUMINIUM CLEANER we are dedicatedly involved in providing an excellent quality array of aluminium cleaner, for catering the various needs of our customers. his is a fluoride base aluminium cleaner for industrial use.this is a dip application product.this is a single tank application for pretreatment of aluminium before powder coating.we have formulated this product with surfactants, wetting agents, fluoride & solvents to remove light oil, dirt & oxide layer present on components in single dip.this chemical works efficiently at room temp.proper etching/cleaning is achieved in 2-3 minutes time.water wash components after application then air dry. Features: Precisely processed Highly effective Free from impurities