INTRODUCTION: Degreasing Chemical used whenever parts contains heavy grease, oil & light rust. This chemical also removes certain part of carbon. Base : Alkaline Base Chemical. Solubility : Thoroughly soluble in water. Color : white Concentration : 5% (w/v) is suitable for Hot process & in case of cold 8% required. Point : Concentrated of 8% bath Solution gives 6 to 8 ml. Point. Bath Design : Tank is made up of 10mm thick. M.S. tank with F.R.P. Vinyl coat of F.R.P. Lining works will be the most suitable or sustainable design

TMT BAR RUST REMOVER Derusting chemical removes rust & carbon from metal & cleans metal surface. Ensure that oxide scales & rust formation is removed. This chemical used whenever parts contains heavy rust and light oil. Base : Phosphoric Acid Base Chemical. Solubility : Thoroughly soluble in water. Color : Colourless . Concentration : One part of chemical is diluted with three parts of water. Dilution depends by the amount of rust present. The chemical is used cold. Point : Concentrated of 25 % bath Solution gives 20 to 22 ml. Point. Bath Design : Tank is made up of 10mm thick. M.S. tank with F.R.P. Vinyl coat of F.R.P. Lining works will be the most suitable or sustainable design of tank. Packing : 40 Kgs. In PVC container Yield Frequency : 250 - 300 Sq. Ft. per liter.

Being a foremost organization in this industry, we are actively engaged in offering the finest quality range of Degreasing Chemical. Additional Information: • Item Code: KLN-18 • Pay Mode Terms: T/T (Bank Transfer) BRAND : KLN 18 PRODUCT NAME : DEGREASING PACKING TYPE : CAN/CARBOYS PACKING SIZE : 35 KG USAGE APPLICATION : INDUSTRIAL FORM OF CHEMICAL : LIQUID USAGE RATIO : 25% (V/V)

Vitarag Chemicals welcomes you. We are proud to introduce ourselves as the leading manufacturer, suppliers of metal pretreatment chemicals in India. Professional Paint Strippingis heavy duty industrial Powder coating remover used for removal of paint & powder coating from the metal surface. The chemical penetrates through the film and the film bubbles out. It is used to remove all types of liquid as well as powder paints, lacquers, enamels & polyurethanes from a metal surface. Professional Paint Stripping is used by immersion application at room temperature. The dipping time may range from 1 to 5 min depending on the surrounding temperature, nature, and thickness of the paint. It may also be applied by brush on the surface of the coating to be removed. Allow standing for 1 to 5 min, depending on the nature and thickness of the coating to be removed. Two or more brush may have to be applied for complete removal of stubborn paint. Remove by scraping, brushing or water jet application. While there are several reasons why you should go for our company: We formulate products based on the end users specific requirements through extensive R& D and validation procedures. We provide reliable and quality products timely as we maintain strict quality control procedures for our raw materials and finished goods. We offer comprehensive customer support post supply We supply products at most competitive prices. In line with clients diverse requirements, we are involved in providing an optimum quality range of Powder Coating /Paint Remover Chemical.

VC-CORO 81-RUST RUST REMOVER: VC-CORO 81-Rust effortlessly removes rust from automotive parts, hardware, tools, cookware, and antiques without any scrubbing or sanding. SAFE TO USE: This metal rust remover is made of a non-toxic and water-based solution that is easy-to-use on automotive, household and industrial-grade metal parts. It contains no harmful acids, solvents, bases, odors or fumes. VERSATILE: The non-corrosive rust remover can be used to remove rust from all metals including auto parts, tools, cast iron cookware, clocks, grills, and more. EASY TO USE: To remove rust from your metal parts submerge completely in the water-based rust remover, once rust is removed, rinse with water and protect with corrosion inhibitor.

GENERAL DESCRIPTION. VCBLK HB-18 is a new revolutionary development in cold black finishing. It will impart jet black conversion coating to steels, cast iron and other ferrous metals at room-temperature.VCBLK HB-18 process is easy to do in-house. It is non-caustic, non-splattering, safe, energysaving, fast, dependable and convenient. It increases productivity and lowers labour costs.Finishing can be done anywhere without special equipment, ventilation, heating systems or anycomplicated control procedures.EQUIPMENT REQUIREDAcid Resistant tanks, containers, tumbling barrels, baskets, hooks and racks must be used withVCBLK HB-18 and derusting tank. Plastic or Rubber lined tanks and plastic-coated hooks andracks are suitable for both VCBLK HB-18 and derusting tanks. Mild steel may be used fordegreasing, rinsing & sealant tanks.DIRECTIONS FOR USE1. Thoroughly clean and degrease the pieces to be blackened in KLN 18. The type and degree ofsurface soil will determine the length of time and the number of cleaning steps and cleaningtemperature (M.S. Tank).2. Rinse thoroughly in overflowing cold water (M.S. Tank).3. Surface rust, if present, should be removed following cleaning cycle using RLN 27 at aconcentration of 1:1 at room temperature (FRP Tank).4. Rinse thoroughly in overflowing cold water (M.S. Tank).5. Immerse the pieces in VCBLK HB-18 solution. VCBLK HB-18 solution is to be diluted with 6to 12 parts of water depending on alloy and surface, hardness. The immersion time necessary toproduce the desired depth of black, is usually one to three minutes. For most parts a dilution ofone part VCBLK HB-18 with 9 parts of water would give good results (FRP Tank).6. Rinse the pieces in overflowing cold water for 30 seconds (M.S. Tank). 7. Immerse the pieces in oil, a dewatering type rust preventive at room temperature for 3 minutesto seal the finish and impart corrosion resistance (M.S. Tank).The above parts can be sealed while wet or dry. If parts have to be dried prior to sealing, step 6should be followed with a hot water rinse and the parts to be sealed as soon as they are dry.A wide range of rust preventives are available with us. Consult us on what type of finish andprotection you require for your parts or components and we can suggest a suitable oil.

3 IN 1 RUST REMOVER CHEMICAL Relying over our expertise in this domain, we are engaged in offering 3 In 1 Rust Remover Chemical to our respected clients. These chemicals are used in only before powder coating for rust removing, light rust removing & metal coating for foundation of powder coating. Use of It increases life of powder coated product Features:- Balanced composition Free from impurity Stable physical and chemical properties low Viscosity Hygienically packed Effectiveness Scale and rust remover concentrate. CRC Rust Remover is a phosphoric acid based concentrate used to remove rust and to clean metal surfaces. It cleans tarnish, oxidation, stains, fingerprints and scale from iron, steel, copper, brass and aluminium.

ALM 81 ALM 81 ALUMINIUM CLEANER Heavy Duty ALM 81 Aluminium Cleaner and Descaler ALM 81 Aluminium Cleaner is a specially formulated highly concentrated ALM 81 Aluminium Cleaner acid for the fast removal of scale and oxide build up from alloy wheels, aluminium vehicle bodies, roller shutter doors and metal casings etc. May also be used for phosphating steel parts prior to painting. A concentrated chemical blend for cleaning all types of aluminium including commercial vehicle bodywork, especially fridge and bulk trailer bodies. It is a concentrated blend of chemical. It works brilliantly at restoring tarnished aluminium that is found on many commercial vehicles such as tipper bodies, aluminium fuel tanks etc. Also helps to protect it against damage from salt and traffic film. ALM81 ALUMINIUM CLEANER we are dedicatedly involved in providing an excellent quality array of aluminium cleaner, for catering the various needs of our customers. his is a fluoride base aluminium cleaner for industrial use.this is a dip application product.this is a single tank application for pretreatment of aluminium before powder coating.we have formulated this product with surfactants, wetting agents, fluoride & solvents to remove light oil, dirt & oxide layer present on components in single dip.this chemical works efficiently at room temp.proper etching/cleaning is achieved in 2-3 minutes time.water wash components after application then air dry. Features: Precisely processed Highly effective Free from impurities

ALKALINE STRIPPER 108 is a specially formulated alkaline composition containing sequestrants andsurface active agents. It is recommended for use on ferrous components for removal of various soils,greases oils, lubricants, drawing & stamping compounds, paints, varnishes and carbon deposits. It alsoremoves light to medium rust from ferrous metal surfaces very effectively. Due to its versatile cleaningproperties, it is widely used for a variety of cleaning applications. ALKALINE STRIPPER 108 shouldnot be used on non-ferrous components. It is non-toxic but corrosive to skin.