KLN 18 DEGREASER
1. Preparation: Ensure the area or surface to be cleaned is cool and turned off if applicable (e.g., machinery). Use appropriate personal protective equipment (PPE) such as gloves and eye protection.
2. Application: Apply KLN 18 Degreaser directly onto the surface to be cleaned, ensuring thorough coverage of the greasy or dirty areas.
3. Dwell Time: Allow the degreaser to dwell on the surface for a few minutes to allow it to penetrate and break down the grease and oils.
4. Agitation: For stubborn or heavily soiled areas, use a brush, scrubbing pad, or pressure washer to agitate the degreaser and lift off the contaminants.
5. Rinsing: Rinse the cleaned surface thoroughly with clean water to remove the degreaser and loosened contaminants.
6. Drying: Optionally, dry the cleaned surface with clean towels or allow it to air dry.
Keywords
4.
1.
PPE
oils
brush
washer
gloves
greasy
Rinsing
surface
minutes
pressure
stubborn
Agitation
machinery
Dwell Time
dirty areas
Application
Preparation
clean water
clean towels
contaminants
soiled areas
scrubbing pad
eye protection
KLN 18 DEGREASER
thorough coverage
appropriate personal protective equipment
