A powder coating remover is a chemical product or process used to strip cured powder coating from a metal surface without causing significant damage to the underlying material. It is commonly used when parts need to be recoated, repaired, or restored.
* How powder coating removers work
- Powder coating forms a hard, cross-linked polymer layer after curing. Unlike ordinary paint, it does not dissolve easily in common solvents. Powder coating removers work by:
- Softening and swelling the coating.
- Breaking down the polymer bonds.
- Allowing the coating to be scraped, brushed, or pressure-washed off.
* Typical application process (chemical remover)
Clean the part to remove grease and dirt.
Apply the remover or immerse the part in a stripping tank.
Allow the recommended dwell time (from minutes to several hours, depending on the product and coating thickness).
Remove the softened coating using a scraper, brush, or pressure washer.
Rinse and neutralize the surface if required.
Dry and prepare the surface for repainting or recoating.
