Industrial blackening solutions
* Application Process
_ Surface Preparation:
1. Clean the metal surface thoroughly to remove oils, grease, and contaminants.
2. Degrease the parts using a suitable solvent or cleaning solution.
3. Rinse the parts with water to remove any cleaning residues.
_Blackening Process:
1. Immerse the metal parts in the blackening solution or apply the solution using a brush, spray, or dip method.
2. Allow the parts to remain in contact with the solution for the specified time to achieve the desired black oxide layer thickness.
3. Rinse the parts with water to remove excess blackening solution.
_ Post-Treatment:
1. Seal the blackened surface with oil, wax, or another protective coating to enhance corrosion resistance and provide a smooth finish.
2. Dry the parts thoroughly before further handling or assembly.
Keywords
wax
oils
time
spray
water
brush
grease
contact
handling
assembly
dip method
metal parts
contaminants
smooth finish
metal surface
Post-Treatment
suitable solvent
cleaning solution
blackened surface
cleaning residues
protective coating
Application Process
corrosion resistance
excess blackening solution
black oxide layer thickness
Industrial blackening solutions
