1. ZNP-54 ZINC PHOSPHATING CHEMICAL 2. Generally zinc phosphate conversion coating is used to provide long lasting corrosion protection. Almost all automotive industries use this type of conversion coating. It is suitable for the products come against hard weather conditions. Coating quality is better than iron phosphate coating. It forms 2 - 5 gr/m² coating on the metal surface when used as under paint. Application, set up and control of this process are more difficult than other methods and can be applied by immersion or spray. 3. Organic compounds like nickel and manganese are added to the bath to increase the coating performance. Also activation can be used to form small phosphate crystals on the metal surface before zinc phosphating. 4. Zinc phosphate reaction happens in amorphous shape with gray - black color. 5. pH optimizers are added to accelerate the reaction. Temperature, application time, concentration, pH, total acid and free acid values are the parameters which must be under control. 6. Zinc phosphates, coating range between 7 - 15 gr/m², are used in wire drawing, tube drawing and cold forming industries. Phosphated metal workpieces are prepared to the next stage by application of protective lubricans and soap

INTRODUCTION: Degreasing Chemical used whenever parts contains heavy grease, oil & light rust. This chemical also removes certain part of carbon. Base : Alkaline Base Chemical. Solubility : Thoroughly soluble in water. Color : white Concentration : 5% (w/v) is suitable for Hot process & in case of cold 8% required. Point : Concentrated of 8% bath Solution gives 6 to 8 ml. Point. Bath Design : Tank is made up of 10mm thick. M.S. tank with F.R.P. Vinyl coat of F.R.P. Lining works will be the most suitable or sustainable design

Base : Phosphoric Acid Base Chemical.Solubility : Thoroughly soluble in water.Color : Water White.Concentration : One part of chemical is diluted with two to four parts of water DilutionIs depended by the amount of oil present. The chemical is used cold.Point : Concentrated of 25 % bath solution gives 8 to 10 ml.Application : This chemical is used whenever parts contain light grease and OIL.

Base : Phosphoric Acid Base Chemical. Solubility : Thoroughly soluble in water. Color : Water White. Concentration : One part of chemical is diluted with two to four parts of water. Dilution Is depended by the amount of oil present. The chemical is used cold. Point : Concentrated of 25 % bath solution gives 8 to 10 ml. Application : This chemical is used whenever parts contain light grease and OIL.

TMT BAR RUST REMOVER Derusting chemical removes rust & carbon from metal & cleans metal surface. Ensure that oxide scales & rust formation is removed. This chemical used whenever parts contains heavy rust and light oil. Base : Phosphoric Acid Base Chemical. Solubility : Thoroughly soluble in water. Color : Colourless . Concentration : One part of chemical is diluted with three parts of water. Dilution depends by the amount of rust present. The chemical is used cold. Point : Concentrated of 25 % bath Solution gives 20 to 22 ml. Point. Bath Design : Tank is made up of 10mm thick. M.S. tank with F.R.P. Vinyl coat of F.R.P. Lining works will be the most suitable or sustainable design of tank. Packing : 40 Kgs. In PVC container Yield Frequency : 250 - 300 Sq. Ft. per liter.

Base : Phosphoric Acid Base Chemical. Solubility : Thoroughly soluble in water. Color : Water White. Concentration : One part of chemical is diluted with two to four parts of water. Dilution Is depended by the amount of oil present. The chemical is used cold. Point : Concentrated of 25 % bath solution gives 8 to 10 ml. Application : This chemical is used whenever parts contain light grease and OIL.

Base : Phosphoric Acid Base Chemical. Solubility : Thoroughly soluble in water. Color : Water White. Concentration : One part of chemical is diluted with two to four parts of water. Dilution Is depended by the amount of oil present. The chemical is used cold. Point : Concentrated of 25 % bath solution gives 8 to 10 ml. Application : This chemical is used whenever parts contain light grease and OIL. Bath Design : Tank make up5mm thick. M.S. tank with rubber or F.R.P. lining. For Small components PVC tank can be used as free grease floats on the surface. Generally tank design is made with large surface areas consideration. Lifting tackles are preferably used for handling material. A bottom outlet with get valve is provided 6’’ above the bottom outlet so that impurities do not disperse in the total solution. A water inlet is provided at the top.

Aluminium Cleaner for Kitchen cleans soft metals/non-ferrous metals very effectively with no discoloration or stain mark or white rust. It was formulated as a neutral cleaner specifically to clean soft metals. However, it is also suitable for cleaning all other ferrous and non-ferrous metals. Eco-friendly aluminium cleaner neutral cleaner is safe for use on all metals and requires no extra steps for most applications. Hence, you may safely and effectively use it as an aluminum cleaner, brass cleaner and copper cleaner as well. This neutral degreaser is best used in a cleaning application where the most powerful cleaning action is desired and different types of metals will be cleaned in the same parts washer. It makes cleaning Aluminium/Aluminum and other soft metal surfaces fast and easy, saving time and money in the process. This brass cleaner is low foaming and a neutral pH biodegradable degreaser/cleaner for use in manual, ultrasonic, spray wash, immersion and many other machine cleaning applications. It is a safe-handling detergent that can be used for non-corrosive cleaning. Despite its several capabilities, Eco-friendly aluminium cleaner degreaser has been one of our most popular industrial cleaning products to clean/degrease Aluminium effectively.

VCHEMKLIN is designed to simplify pre-paint treatment of metal aircraft surfaces like wing sections, fuselages as well as automobiles and tractor assemblies. Complete assembled planes can be cleaned and conditioned right on the field without the use of special equipment. Easy hand application of VCHEMKLIN by brushing, swabbing or spraying provides thoroughly clean passivated surface ready for touch-up or complete refinishing. FAST, LOW COST METHOD :- Passivating with VCHEMKLIN is not intended to replace anodizing and chromatising in aircraft and automobile manufacturing. However it produces similar results faster and at much lower cost where those processes are impractical or unavailable. REMOVES, PREVENTS CORROSION :- Light oxides and surface corrosive residues are quickly and easily removed by merely applying VCHEMKLIN by wipe method and rinsing with water. Surfaces is made chemically inert oxide and soil free to prevent corrosion from spreading under paint coatings.