1. ZNP-54 ZINC PHOSPHATING CHEMICAL 2. Generally zinc phosphate conversion coating is used to provide long lasting corrosion protection. Almost all automotive industries use this type of conversion coating. It is suitable for the products come against hard weather conditions. Coating quality is better than iron phosphate coating. It forms 2 - 5 gr/m² coating on the metal surface when used as under paint. Application, set up and control of this process are more difficult than other methods and can be applied by immersion or spray. 3. Organic compounds like nickel and manganese are added to the bath to increase the coating performance. Also activation can be used to form small phosphate crystals on the metal surface before zinc phosphating. 4. Zinc phosphate reaction happens in amorphous shape with gray - black color. 5. pH optimizers are added to accelerate the reaction. Temperature, application time, concentration, pH, total acid and free acid values are the parameters which must be under control. 6. Zinc phosphates, coating range between 7 - 15 gr/m², are used in wire drawing, tube drawing and cold forming industries. Phosphated metal workpieces are prepared to the next stage by application of protective lubricans and soap

GENERAL DESCRIPTION. VCBLK HB-18 is a new revolutionary development in cold black finishing. It will impart jet black conversion coating to steels, cast iron and other ferrous metals at room-temperature.VCBLK HB-18 process is easy to do in-house. It is non-caustic, non-splattering, safe, energysaving, fast, dependable and convenient. It increases productivity and lowers labour costs.Finishing can be done anywhere without special equipment, ventilation, heating systems or anycomplicated control procedures.EQUIPMENT REQUIREDAcid Resistant tanks, containers, tumbling barrels, baskets, hooks and racks must be used withVCBLK HB-18 and derusting tank. Plastic or Rubber lined tanks and plastic-coated hooks andracks are suitable for both VCBLK HB-18 and derusting tanks. Mild steel may be used fordegreasing, rinsing & sealant tanks.DIRECTIONS FOR USE1. Thoroughly clean and degrease the pieces to be blackened in KLN 18. The type and degree ofsurface soil will determine the length of time and the number of cleaning steps and cleaningtemperature (M.S. Tank).2. Rinse thoroughly in overflowing cold water (M.S. Tank).3. Surface rust, if present, should be removed following cleaning cycle using RLN 27 at aconcentration of 1:1 at room temperature (FRP Tank).4. Rinse thoroughly in overflowing cold water (M.S. Tank).5. Immerse the pieces in VCBLK HB-18 solution. VCBLK HB-18 solution is to be diluted with 6to 12 parts of water depending on alloy and surface, hardness. The immersion time necessary toproduce the desired depth of black, is usually one to three minutes. For most parts a dilution ofone part VCBLK HB-18 with 9 parts of water would give good results (FRP Tank).6. Rinse the pieces in overflowing cold water for 30 seconds (M.S. Tank). 7. Immerse the pieces in oil, a dewatering type rust preventive at room temperature for 3 minutesto seal the finish and impart corrosion resistance (M.S. Tank).The above parts can be sealed while wet or dry. If parts have to be dried prior to sealing, step 6should be followed with a hot water rinse and the parts to be sealed as soon as they are dry.A wide range of rust preventives are available with us. Consult us on what type of finish andprotection you require for your parts or components and we can suggest a suitable oil.

Industrial Degreaser INTRODUCTION: Industrial Degreaser Chemical used whenever parts contains heavy grease, oil & light rust.This chemical also removes certain part of carbon. Contaminated component surfaces, such as those caused by residues of forming oils, impair the quality during production. Degreasing as a cleaning process therefore makes a significant contribution to the economic efficiency of the production process. When processing sheet metal parts and metal, the use of lubricants and oils is sometimes necessary. For example, cooling lubricants are used before turning and milling or forming oils. Since the residues of grease and oils can have a disturbing effect in further processing steps, degreasing is part of the preparatory surface treatment. Special solvents, so-called degreasing agents, are used to this end. The dissolve greases and oils from the surface of the workpiece, thus degreasing and de-oiling them. Degreasing can be carried out with liquid solutions or in the form of dry degreasing.

Best Degreaser for Automotive: Contaminated component surfaces, such as those caused by residues of forming oils, impair the quality during production. Degreasing as a cleaning process therefore makes a significant contribution to the economic efficiency of the production process. When processing sheet metal parts and metal, the use of lubricants and oils is sometimes necessary. For example, cooling lubricants are used before turning and milling or forming oils. Since the residues of grease and oils can have a disturbing effect in further processing steps, degreasing is part of the preparatory surface treatment. Special solvents, so-called degreasing agents, are used to this end. The dissolve greases and oils from the surface of the workpiece, thus degreasing and de-oiling them. Degreasing can be carried out with liquid solutions or in the form of dry degreasing.

GR-63 ENGINE DEGREASER INTRODUCTION: GR-63 ENGINE DEGREASER Chemical used whenever parts contains heavy grease, oil & light rust.This chemical also removes certain part of carbon. Contaminated component surfaces, such as those caused by residues of forming oils, impair the quality during production. Degreasing as a cleaning process therefore makes a significant contribution to the economic efficiency of the production process. When processing sheet metal parts and metal, the use of lubricants and oils is sometimes necessary. For example, cooling lubricants are used before turning and milling or forming oils. Since the residues of grease and oils can have a disturbing effect in further processing steps, degreasing is part of the preparatory surface treatment. Special solvents, so-called degreasing agents, are used to this end. The dissolve greases and oils from the surface of the workpiece, thus degreasing and de-oiling them. Degreasing can be carried out with liquid solutions or in the form of dry degreasing.

Description: Vitarag Chemicals Paint stripper is formulated to remove old paint film from Steel , Aluminium,Wood etc. Recimmended use: Excellent paint stripper for striping old paint from various objects without damaging the original object. This saves a lot of time and labor as this projuct gives instant results. Method of Application : 1 Sprinkle water on the surface from which the old paint film is removed. 2 Give light zig-zag scratches on the paint surface so that the paint remove properly penetrates the paint up to the base . 3 Apply paint stripper by brush on the scratched surface . 4 For better results specially in summer again sprinkle water on the surface where paint remove is applied. 5 Paint film will immediately start pilling of from the surface. After total pilling of paint fill scrap it and wash it with the water properly. 6 If paint layers are more on the surface repeat the method 1 to 5 again

Description: Vitarag Chemicals Paint stripper is formulated to remove old paint film from Steel , Aluminium,Wood etc. Recimmended use: Excellent paint stripper for striping old paint from various objects without damaging the original object. This saves a lot of time and labor as this projuct gives instant results. Method of Application : 1 Sprinkle water on the surface from which the old paint film is removed. 2 Give light zig-zag scratches on the paint surface so that the paint remove properly penetrates the paint up to the base . 3 Apply paint stripper by brush on the scratched surface . 4 For better results specially in summer again sprinkle water on the surface where paint remove is applied. 5 Paint film will immediately start pilling of from the surface. After total pilling of paint fill scrap it and wash it with the water properly. 6 If paint layers are more on the surface repeat the method 1 to 5 again

VITARAG CHEMICALS IS LEADING MANUFACTURER OF STRIPPI POWERFULL PAINT REMOVER. Vitarag Chemicals Paint stripper is formulated to remove old paint film from Steel , Aluminium,Wood etc. Recommended use: Excellent paint stripper for striping old paint from various objects without damaging the original object. This saves a lot of time and labor as this projuct gives instant results. Method of Application : 1 Sprinkle water on the surface from which the old paint film is removed. 2 Give light zig-zag scratches on the paint surface so that the paint remove properly penetrates the paint up to the base . 3 Apply paint stripper by brush on the scratched surface . 4 For better results specially in summer again sprinkle water on the surface where paint remove is applied. 5 Paint film will immediately start pilling of from the surface. After total pilling of paint fill scrap it and wash it with the water properly. 6 If paint layers are more on the surface repeat the method 1 to 5 again

Recimmended use: Excellent paint stripper for striping old paint from various objects without damaging the original object. This saves a lot of time and labor as this projuct gives instant results. Method of Application : 1 Sprinkle water on the surface from which the old paint film is removed. 2 Give light zig-zag scratches on the paint surface so that the paint remove properly penetrates the paint up to the base . 3 Apply paint stripper by brush on the scratched surface . 4 For better results specially in summer again sprinkle water on the surface where paint remove is applied. 5 Paint film will immediately start pilling of from the surface. After total pilling of paint fill scrap it and wash it with the water properly. 6 If paint layers are more on the surface repeat the method 1 to 5 again