Degreaser For Stainless Steel used whenever parts contains heavy grease, oil & light rust.This chemical also removes certain part of carbon. Contaminated component surfaces, such as those caused by residues of forming oils, impair the quality during production. Degreasing as a cleaning process therefore makes a significant contribution to the economic efficiency of the production process. When processing sheet metal parts and metal, the use of lubricants and oils is sometimes necessary. For example, cooling lubricants are used before turning and milling or forming oils. Since the residues of grease and oils can have a disturbing effect in further processing steps, degreasing is part of the preparatory surface treatment. Special solvents, so-called degreasing agents, are used to this end. The dissolve greases and oils from the surface of the workpiece, thus degreasing and de-oiling them. Degreasing can be carried out with liquid solutions or in the form of dry degreasing.

Base : Phosphoric Acid Base Chemical. Solubility : Thoroughly soluble in water. Color : Water White. Concentration : One part of chemical is diluted with two to four parts of water. Dilution Is depended by the amount of oil present. The chemical is used cold. Point : Concentrated of 25 % bath solution gives 8 to 10 ml. Application : This chemical is used whenever parts contain light grease and OIL. Bath Design : Tank make up5mm thick. M.S. tank with rubber or F.R.P. lining. For Small components PVC tank can be used as free grease floats on the surface. Generally tank design is made with large surface areas consideration. Lifting tackles are preferably used for handling material. A bottom outlet with get valve is provided 6’’ above the bottom outlet so that impurities do not disperse in the total solution. A water inlet is provided at the top.

INTRODUCTION : CORONIL-555 is an antirust chemical compound that is readily soluble in water. It is widely used to give temporary protection against rusting of steel tubes, pipes, strips, profiles and various other ferrous parts, during process. CORONIL-555 is an antirust chemical compound that is readily soluble in water. USES : 1) It can be used as an anti-rust treatment after acid pickling or phosphating. The acid pickled or phosphated parts after rinsing are dipped or sprayed with the solution of CORONIL-555. 2) It can be used as a Passivation cum Neutralizer for machined components, for multi-metal assemblies, for ground parts and for various maintenance jobs after cleaning. It can be used either by dip, spray or by circulation. 3) It can be used as an antirust additive for : (a) Air-testing in water. (b) Hydro testing (especially of pipelines). 4) It can be added to cutting coolants or machining fluids to prevent rusting of cutting tools and workpieces for a few days.

Base : Phosphoric Acid Base Chemical.Solubility : Thoroughly soluble in water.Color : Water White.Concentration : One part of chemical is diluted with two to four parts of water DilutionIs depended by the amount of oil present. The chemical is used cold.Point : Concentrated of 25 % bath solution gives 8 to 10 ml.Application : This chemical is used whenever parts contain light grease and OIL.

Physical State: Liquid Usage: Industrial, Laboratory Being an eminent organization in the industry, we are involved in providing a premium quality range of Passivation Chemical. BRAND : PSV 72 PRODUCT NAME : PASSIVATION PACKING TYPE : CAN/CARBOYS PACKING SIZE : 30 KG USAGE APPLICATION : INDUSTRIAL FORM OF CHEMICAL : LIQUID USAGE RATIO : 0.1% (V/V)

PASSIVATION - PSV-72 - INTRODUCTION & APPLICATION : - PASSIVATION is a cold & hot Passivation Solution used in the final rinse after - Phosphating. In hot Passivation temperature 700c. - BATH MAKE-UP : - Passivation Solution make by 0.1% v/v. Rinse the phosphate material dip in - passivation bath 1 minute. - BATH MAINTENANCE : - Passivation should be clean. if bath is contaminating it should be discard & make - up new bath.

Base : Phosphoric Acid Base Chemical.Solubility : Thoroughly soluble in water.Color : Water White.Concentration : One part of chemical is diluted with two to four parts of water DilutionIs depended by the amount of oil present. The chemical is used cold.Point : Concentrated of 25 % bath solution gives 8 to 10 ml.Application : This chemical is used whenever parts contain light grease and OIL.

Vitarag Chemicals is a leading manufacturer of metal Pre Treatment Chemicals which can also be known as powder coating chemicals manufacturer. We have been manufacturing and supplying pre treatment chemicals to Powder Coating Chemicals For Steel in India and out of India.

CHROMATIZING Aluminium chromate and its applications What we call as phosphating to steel an iron is called chromating for aluminium surfaces. Also it is knows as alodine coating. There are yellow, green and transparent chromating types. Yellow chromate coats Cr+6, green chromate coats Cr+3. Coating weight can vary according to application time and coating type. Drying temperature must not pass over 65 º C for yellow chromate and 85 º C for green and transparent chromate coatings. It is importat to provide clean, grease free surface before chromate application. If hot degreasing bath is prepared, caustic bath and following nitric acid bath can be used for pickling. On the other hand, acidic degreasing baths have pickling ability with itselves. Chromating and paint adhesion will be much better on pickled and degreased aluminium surface.